![](http://clecosmetics.com/cdn/shop/files/RC_02.jpg?v=1682105124&width=2441)
Recycling Guide
![](http://clecosmetics.com/cdn/shop/files/ccc-gif.gif?crop=center&height=2666&v=1677886768&width=2000)
- Squeeze out any excess product from the tubes.
- Cut the top of the tube and clean the inside with hot water and dish soap.
- Dry out the tube before recycling.
- Recycle the cap & tube separately.
![](http://clecosmetics.com/cdn/shop/files/mlp-gif.gif?crop=center&height=2666&v=1677886954&width=2000)
- Empty out the plastic bottle and clean both bottle & doe foot.
- Using a tissue, pull on the fuzzy tip from the stem and dispose. The applicator end of the doe foot is the only non-recyclable component of the Melting Lip Powder.
- Use your nail or a blunt tool to remove the plastic wiper located at the opening of the Melting Lip Powder bottle.
- Recycle the bottle and cap separately.
![](http://clecosmetics.com/cdn/shop/files/ftll-jpg.jpg?crop=center&height=2666&v=1677887480&width=2000)
Fluid Touch Liquid Liner cannot be recycled. Discard in trash after use.
![](http://clecosmetics.com/cdn/shop/files/bam-gif.gif?crop=center&height=2666&v=1677886526&width=2000)
- Remove cap.
- Pull top of pump off to separate plastic and aluminum spring.
- Cut top of tube and clean inside of remaining product.
![](http://clecosmetics.com/cdn/shop/files/ser-jpg.jpg?crop=center&height=2666&v=1677888239&width=2000)
Due to the anatomy of the container, it will be difficult to recycle the entire casing. We have two available options as of now :
Option 1: Check with your local recycling center if they accept combined aluminum and plastics. If they don’t need to be separated, then you can recycle!
If Option 1 is not available for you, then please opt for Option 2.
Option 2: Discard in trash.
![](http://clecosmetics.com/cdn/shop/files/mc-gif.gif?crop=center&height=2666&v=1677888391&width=2000)
- Squeeze out any excess product from the tubes.
- Cut the top of the tube and clean the inside with hot water and dish soap.
- Dry out the tube before recycling.
- Recycle the cap & tube separately.
![](http://clecosmetics.com/cdn/shop/files/vce-gif.gif?crop=center&height=2666&v=1677888585&width=2000)
- Take out the glass tip from the dropper.
- Twist and pull out the rubber cap.
- Clean glass dropper & rubber cap with hot water and dish soap.
- Empty out the glass bottle & clean with hot water and dish soap.
- Recycle the bottle cap & cover.
- Recycle all components separately.
![](http://clecosmetics.com/cdn/shop/files/ofc-gif.gif?crop=center&height=2666&v=1677889009&width=2000)
- Unscrew the top pump from the bottle.
- Empty out the bottle and clean with hot water & dish soap.
- Separate the pump by pulling out the straw & the nozzle.
- Use scissors to cut off the plastic tube covering the spring. Use caution when cutting as the spring & plastic can fly off.
- Remove the metal spring.
- Recycle all components. Do not forget to separate your metals & plastics.