1. Empty out the plastic bottle and clean both bottle & doe foot.
2. Using a tissue, pull on the fuzzy tip from the stem and dispose. The applicator end of the doe foot is the only non-recyclable component of the Melting Lip Powder.
3. Use your nail or a blunt tool to remove the plastic wiper located at the opening of the Melting Lip Powder bottle.
4. Recycle the bottle and cap separately.

Fluid Touch Liquid Liner cannot be recycled. Discard in trash after use.

1. Discard the puff applicator.
2. Pinch and remove the cushion sponge and discard.
3. Empty and wipe off all excess liquid from the compact base.
4. Twist and detach the mirror to discard.
5. Recycle the compact base.

1. Remove cap.
2. Pull top of pump off to separate plastic and aluminum spring.
3. Cut top of tube and clean inside of remaining product.

Due to the anatomy of the container, it will be difficult to recycle the entire casing. We have two available options as of now : 

Option 1: Check with your local recycling center if they accept combined aluminum and plastics. If they don’t need to be separated, then you can recycle! 

If Option 1 is not available for you, then please opt for Option 2. 

Option 2: Discard in trash.

1. Squeeze out any excess product from the tubes.
2. Cut the top of the tube and clean the inside with hot water and dish soap.
3. Dry out the tube before recycling.
4. Recycle the cap & tube separately.

1. Take out the glass tip from the dropper.
2. Twist and pull out the rubber cap.
3. Clean glass dropper & rubber cap with hot water and dish soap.
4. Empty out the glass bottle & clean with hot water and dish soap.
5. Recycle the bottle cap & cover.
6. Recycle all components separately.

1. Unscrew the top pump from the bottle.
2. Empty out the bottle and clean with hot water & dish soap.
3. Separate the pump by pulling out the straw & the nozzle.
4. Use scissors to cut off the plastic tube covering the spring. Use caution when cutting as the spring & plastic can fly off.
5. Remove the metal spring.
6. Recycle all components. Do not forget to separate your metals & plastics.

1. Unscrew the top pump from the bottle.
2. Empty out the bottle and clean with hot water & dish soap.
3. Separate the pump by pulling out the straw & the nozzle.
4. Use scissors to cut off the plastic tube covering the spring. Use caution when cutting as the spring & plastic can fly off.
5. Remove the metal spring.
6. Recycle all components. Do not forget to separate your metals & plastics.

The air puff applicator can be used multiple times with washes in between. Use until it starts to tear then discard in trash.